Mark L. Rossmann’s 1/48 Tamiya North American P-51D Mustang; 227 “Mary Alyce”/“My Miss Moe”; 46th Fighter Squadron, 21st Fighter Group

Mark L. Rossmann is back with another Iwo Jima VLR Mustang build. This time, a 1/48 Tamiya North American P-51D Mustang built with the markings for a 46th FS, 21st FG P-51D-20-NA, Serial No. 44-63451, 227 “Mary Alyce”/“My Miss Moe” flown by Lt. Robert J. Louwers and Lt. John E. Montgomery, III.

Mark L. Rossmann

While the 1/48th scale Tamiya kit does not have the necessary parts to build an accurate Iwo Jima VLR Mustang, it still builds into a very nice and accurate representation of a D model Mustang. Mark relocated the dorsal antenna to the correct position below the front fuselage just in front of the main wheel well covers. Mark used toothpicks to create the dual Uncle Dog antennae. Nice touch in light of the fact that actual antennae were made of wood.

Eduard

Mark used the AeroMaster Decal sheet 48-797, The Very Long Range Escorts, “The Iwo Jima Mustangs” Fancy Art Part 4. Unfortunately, this sheet does not provide the decal for My Miss Moe which appears on the right side of the nose, so Mark used the decal from the Eduard sheet contained in the limited edition Tales of Iwo Jima boxing.

Mark L. Rossmann

Below is the only photograph I can find for 227 “Mary Alyce”/My Miss Moe”. This photo appears in Carl Moleworth’s book Very Long Range Mustangs Units of the Pacific War which can be purchased from Osprey Publishing in a traditional softbound book format or in an ebook format. This title and many other aviation titles can be purchased at Osprey.

A few items to note from the photograph for the modeler. First, please note how weathered 227 “Mary Alynce”/“My Miss Moe” appears. While the Mustangs on Iwo Jima were well maintained, the conditions on Iwo Jima were harsh on planes from an appearance prespective. Second, the airfield dust shows that this Mustang was equipped with tires with a block tread pattern. Third, please note the right main landing gear leg, and how dark it is. I have seen color photos of 21st Fighter Group Mustangs while on Saipan in which the landing gear legs look like they have been painted bronze green.

227 “Mary Alyce”/“My Miss Moe” on Iwo Jima (Robert J. Louwers via Carl Molesworth)

Mary Alyce was Lt. Louwers’ wife’s name. It is not known if the pin-up art that adorns the left side of the fuselage below canopy is an attempted depiction of the actual Mary Alyce Louwers.

Mark L. Rossmann

Neither Lt. Louwers or Lt. Montgomery were credited with any aerial or ground victories. Lt. Louwers completed 9 VLR missions while on Iwo Jima.

Mark L. Rossmann

Mark achieved a very nice natural metal finish, and I like the light weathering that is achieved with a simple panel line wash. Thanks to Mark for sharing his build with us, and kudos on a very nice result. More to come from Mark.

References: Very Long Range P-51 Units of the Pacific War, Carl Molesworth, Osprey Publishing, 2006.

Alex Parker’s 1/32nd Tamiya North American P-51D Mustang

Alex Parker built Tamiya’s Pacific Theater 1/32 North American P-51D/K Mustang kit into the 15th Fighter Group, 47th Fighter Squadron’s “Lil Butch”.

Alex Parker

Alex’s focus for this build was on a plane involved in the first VLR escort mission to Japan on April 7, 1945. Using the narrative of that mission from Carl Molesworth’s book Very Long Range P-51Mustang Units of the Pacific War, Alex decided on the Mustang flown by Captain Robert R. Down, who along with 1st Lt. Dick Hintermeier, shot down a Kawasaki Ki-45 Toryu (Nick). This is considered the first aerial victory over the Japanese Home Islands by a 7th Fighter Command Mustang. Captain Down would later shoot down a Nakajima Ki-44 Shoki (Tojo) on the same mission.

Captain Robert R. Down of 47th FS/15th FG with ground crew (Mark Stevens/7th Fighter Command Association)

Alex used Barracuda Studios resin tires to replace those unique rubber wheels that come with the Tamiya kit, RB Productions seat belts, and the brass replacement barrels for the Zoukei Mura P-51D Mustang kit (produced by Aber) to enhance the build.

Alex Parker

In addition to adding the wiring harness’ and spark plug wires, Alex incorporated other wires and hoses to detail Tamiya’s excellent rendition of the Mustang’s Packard built Rolls Royce Merlin engine.

Alex Parker

Alex added a seat back cushion seen in wartime Mustangs, and seat belts from RB Productions. Extremely nice additions to an already nice cockpit.

Alex Parker

The picture below shows just how busy the detailed engine compartment and cockpit look after the fuselage halves have been joined.

Alex Parker

Wire was added to the wheel wells to simulate hydraulic and electrical lines.

Alex Parker

In addition to the brass barrels, wire was added to the guns bays, and Alex did a great job of painting the 50 caliber ammunition.

Alex Parker

Alex used Alclad II lacquers for the natural metal finish. All of the squadron markings, national insignias, fuselage numbers, and the serial numbers were painted on. Since there are no commercially available decals for 150 “Lil Butch” in 1/32nd scale, Alex made masks for the national insignias, fuselage numbers, serial numbers, and the plane name “Lil Butch” using a Silhouette Cameo mask cutter. Mr. Color and MRP lacquer paints were used for the markings.

Having the ability to create your own paint masks opens the door to almost unlimited possibilities as far as markings. The good folks over at Large Scale Planes have created a new website/forum for those interested in creating their own paint masks called Scale Model Paint Masks. Check it out here: https://www.scalemodelpaintmasks.com/

Alex Parker

Alex used pastels extensively in the cockpit, engine compartment, wheel wells, and on the exterior to weather the model. I like how the pastels along with clear coats do nice job in knocking down the semi-gloss appearance of markings and shine of the Alclad II natural metal finishes.

Alex Parker

Overall, an extremely nice build.

Alex Parker

Alex’s build thread on Large Scale Planes can be found here: https://forum.largescaleplanes.com/index.php?/topic/87527-p-51d-47th-fs-15th-fg-iwo-jima-1945-tam-132-done/. Alex plans on building Zoukei Mura’s 1/32 Kawasaki Ki-45 Toryu (Nick) in the markings of one of the Japanese Army Air Force units that participated in the defense of the Home Islands on April 7, 1945. Looking forward to that build.