I believe these are unprecedented times for modelers as far the the range of products that are available. We have seen the emergence of new kit manufacturers, and because of advances in design technology, the quality of kits (engineering) has improved to the point that more and more kits are easier to build without a lot of fit issues.
After market manufacturers have also taken advantage of advances in technology. In addition to traditional products such as photo-etch update sets, resin update sets, vacuformed canopies, white metal and brass landing gear sets, and brass machine gun and canon barrels, we are now seeing a proliferation of after market manufacturers producing 3-D decals for instrument panels and cockpit details. Because of advances in 3-D printer capability, some after market resin manufacturers are turning to 3-D printing of parts and away from the labor intensive and wasteful manual casting process.
Model paints have basically stayed the same as far as the types paints manufactured (acrylics, enamels and lacquers), but we have seen the emergence of new manufacturers, like Hataka Hobby and MRP, attempts improve on existing paints formulas, and the introduction of different lines of paints by certain manufacturers. We have at our disposal a variety of really good model paints with ever increasing ranges of colors.
One of the manufacturers introducing multiple lines of paint is AK Interactive. AK Interactive started with water based acrylic paints for armor, aircraft, and figures. Since that time, they have introduced a line of metallic paints (Extreme Metals), a line of acrylic lacquers for World War II and modern military vehicles and aircraft (Real Colors), and a new line of water based acrylics (3rd Generation Acrylics).
My initial attraction to their Real Colors line of acrylic lacquers was the range of their colors (114 colors for AFV and 133 colors for aircraft), and the fact that they have what appears to be a full line of paints for World War II Japanese Army and Navy aircraft. AK Interactive touts this line of paints as being developed in close consultation with experts who have spent years researching paints used by various combatants. The time spent by AK Interactive researching colors definitely shows. For instance, if you are a modeler that focuses on Luftwaffe aircraft, AK Interactive Real Colors Air series has 3 variations of RLM 76 (Lichtblau), and 3 variations of RLM 81 (Braunviolett) to take in account standard and late war variations.
Compatibility with other acrylic lacquer paint lines is a selling point pushed very hard by AK Interactive. The Real Colors line comes with its own thinner which AK Interactive labels as “High Compatibility Thinner” meaning that you can use it to thin other acrylic lacquer paints, such as Mr. Color and Hataka Hobby acrylic lacquers. Likewise, AK Interactive promotes that you can thin Real Colors with other acrylic lacquer thinners, like Mr. Color Leveling Thinner, and you can mix Real Colors with other acrylic lacquer paints.
The paints come in 10 ml glass bottles and can be purchased individually or in convenient sets of four. I purchased the WW2 US Interior Color set (Dull Dark Green, RC230; US Interior Yellow Green, RC262; Zinc Chromate Yellow, RC263; and Bronze Green, RC264) and a few individual paints. The 10 ml bottle is the same type of bottle used by Tamiya, and has the color and the product number on the lid for easy identification.
I am going to test Real Colors using their own thinner, Mr. Color Leveling Thinner, Hataka Hobby’s acrylic lacquer thinner, and 91% isopropyl alcohol. The paints do not have an overly strong odor and mix very easily by just shaking the bottle.
The first is a test on a plastic spoon using Dark Dull Green, FS34092 (RC230) with AK Interactive’s High Compatibility Thinner. While the paint is not as thick as Mr. Color lacquers, it does need to be thinned. I thinned the Dark Dull Green at a rate of 2 parts paint to 1 part thinner to see how it would spray at that ratio, and sprayed it at 16 psi. The paint laid down beautifully to a smooth matte to semi-matte sheen and covered well. I did have an issue of getting a little paint spit when resuming to paint. I am not sure why the paint did this, but it may have been because the paint was not thinned sufficiently, or I was not spraying at a high enough pressure.
Next was US Interior Yellow Green (RC262) on a plastic spoon using Mr. Color Leveling Thinner at a ratio of 1 part paint to 1 part thinner. I increased the pressure to 20 psi. The paint thinned really well using the Mr. Color Leveling Thinner and again laid down beautifully to a very smooth matte to semi-matte finish. I did not experience the problem with the paint spitting after thinning it more and increasing the pressure. The paint dries within a few minutes to a very tough finish.
Next was Zinc Chromate Yellow (RC263) on a plastic spoon using the Hataka Hobby acrylic lacquer thinner at a ratio of 1 part paint to 1 part thinner at 20 psi. The paint thinned well using Hataka Hobby’s acrylic lacquer thinner, and again laid down beautifully to a very smooth matte to semi-matte finish. I did not experience the problem with the paint spitting. Even with a lighter color, the paint covered well.
Last, I painted the tires and fuselage fuel tank from the Eduard P-51D Mustang kit with Rubber Black (RC022) using 91% isopropyl alcohol thinned to a 1 to 1 ratio. Again, as you can tell from the photos below, the paint laid down beautifully and covered very well.
So a few concluding remarks. First, cleanup was easy, and you do not have to break down and clean your airbrush between colors. Just flush out the prior color with a good airbrush cleaner (I use Alclad II Airbrush Cleaner), and load up the new color. Second, it appears that AK Interactive has lightened the paint to take into account the scale effect of color. Their water based acrylic paints are also lightened to take into account the scale effect of color.
I really like this line of paints. They thin nicely with any type of acrylic lacquer thinner, lay down beautifully to a smooth matte to semi-matte finish, dry quickly, and are very durable. The range of colors is very impressive. Highly recommended.
I did not attempt to thin Real Colors with anything other than thinners made for acrylic lacquers and isopropyl alcohol. AK Interactive markets Real Colors by claiming that they can be thinned with thinners used for water based acrylic paints. Flory Models did a comprehensive vlog of AK Interactive’s Real Colors on YouTube https://youtu.be/kvEwxVcY3TE using a lot of different thinners. Their vlog is worth watching.
3 thoughts on “Paint Review: AK Interactive Real Colors Acrylic Lacquers”
Interesting. It may be the lighting, but none of those colours actually looked like the colour they are supposed to be. What did you think?
Hi Mark. Thanks for checking in and good observation. What you see in the photos is pretty accurate with the colors as they sprayed. They are definitely lighter than the actual colors when you compare them to available paint chips (and the colors represented on their labels). It is my understanding that AK Interactive lightens their colors to take into effect the scale effect of color.
Pingback: Paint Review: AK Interactive Real Colors Acrylic Lacquers — Iwo Jima Models | Ups Downs Family History