UpRise Decals from St. Petersburg, Russia has released decal sheets featuring two 457th Fighter Squadron, 506th Fighter Group North American P-51D-25-NA Mustangs in 1/72nd, 1/48th, and 1/32nd scales.

UpRise produces decals for both World War II and modern military aircraft, civil aircraft and airliners, helicopters, ordinance, and insignia. Their website can be found here: https://uprise-decal.ru/

Decals are provided for 542 “Fighting Lady” (Serial No. 44-72570), and 528 “The Enchantress” (Serial No. 44-72671). Both of these planes are popular among modelers because of the pin up art which adorned their fuselages.

The decals are lazer printed and look exceptionally good, and each sheet comes with the dive angle stripes that appeared on the leading edge of the top of the wings and most of the exterior stencils that appeared on 506th FG P-51D Mustangs. The extensive exterior stencil decals are a nice nice touch on UpRise Decals’ part.

528 “The Enchantress” was assigned to 2nd Lt. William E. Saks. 2nd Lt. Saks went Missing in Action on the infamous June 1st “Black Friday” escort mission to Osaka in which 27 Mustangs and 24 pilots of the 15th, 21st and 506th Fighters Groups were lost to severe weather conditions encountered between Iwo Jima and the Japanese Home Islands. His Missing Air Crew Report indicates that he was flying a different P-51D-25 Mustang (Serial No. 44-72885) on that mission. The Enchantress survived the war and was transferred to Japan as part of the occupation forces after the cessation of hostilities.

It is unknown if a second pilot was assigned initially to fly The Enchantress along with 2nd Lt. Saks, and if any other pilots were specifically assigned to the plane after 2nd Lt. Saks was lost on June 1st. We are unable to locate an individual picture of 2nd Lt. Saks, or a group picture that includes him. The picture below is of Dr. Theodore Paprocki, the 457th squadron’s medical officer, sitting on the wing of The Enchantress. Note the wear of the paint on the back sides of the propeller blades (uncuffed portions) due to the sand and volcanic ash on Iwo Jima.

The other decals are for 542 “Fighting Lady” which was assigned to 1st Lt. Ralph Gardner and 1st Lt. Chester Jatzcak. Below is a nice close up picture of the pin up art that adorned the fuselage.

While the quality of the below photo is not the best, it does clearly show the position of the name “Fighting Lady” on the nose below the engine exhaust stacks and the elegant design of the Mustang’s nose.

Norma Jatczak, 1st Lt. Chester Jatczak’s wife, was of the belief that the plane’s name was “Broadway Gal”. Unfortunately, the 506th Fighter Group Association does not have a photo to substantiate her belief.

Please note the photo below does not have the name “Fighting Lady” on the nose yet. This photo was likely taken in June of 1945 as the plane has a solid green tail instead of the initial squadron markings of diagonal green stripes on the tail.

I interviewed Ralph Gardner at the 2013 506th Fighter Group Reunion in Chino, California, but did not think to inquire about the whether the plane had the name of “Broadway Gal” at one point in time, or whether the name was on the right side of the nose. The photo below appears to dispel the notion that “Broadway Gal” appeared on the right side of the nose.

UpRise Decals uses Film Free Ability (FFA) for their decals. This is the technology that allows the modeler to remove the clear film that covers the decal during production. The initial application of FFA decals is the same as regular water slide decals. After applying the decals, whisking away the excess water, and working out any air bubbles from under the decals, you let the decals sit for 24 hours, and then gently remove the film that covers the decals. Without any film surrounding the decals, they look like they are painted on. Really nice!

A tutorial/description of UpRise Decals’ Film Free Ability decals is found here: https://uprise-decal.ru/ffa. There are also several YouTube videos providing tutorials on how to use these and similar decals from other manufacturers.

UpRise Decals can be purchased on eBay from two vendors who appear the be the same person. When I initially purchased these decals, the FFA was only available on their 1/32nd decal sheets, but now all their decals (1/144th, 1/72nd, 1/48th, 1/32nd and 1/24th) produced from November 2022 forward use the FFA technology. If you want to use UpRise’s FFA decals, you need to check to make sure that the particular decal sheet you are buying has the FFA technology. There are probably some the regular water slide decals still being sold or resold on eBay.