Photo(s) of the Week; Life Raft Rescue Kit

With VLR pilots spending so much time on missions over the vast expanse of the Pacific Ocean, every effort was made to reduce the amount of time a pilot spent in the water or on the water. Naval resources were stationed along the route to pluck pilots out of the Pacific. Submarines were stationed off of the coast of Japan to pick up pilots who were successful in reaching the Pacific before having to bail out or to ditch. Destroyers were stationed along the route, and PBY Catalinas were in the air.

The United States Army Air Force aircraft were also involved in air-sea rescues of their own pilots. Boeing B-17 Flying Fortresses (SB-17s) were modified to carry a motorized 27 foot A-1 Higgins boat to be dropped to downed pilots. North American P-51D Mustangs were also involved in these efforts.

15th Fighter Group members Major James B. Tapp and Captain Vic Mollan combined to develop a droppable rescue kit packaged into a 110 gallon metal drop tank while on Oahu. The picture below shows a life raft rescue kit installed on 15th Fighter Group commander Colonel James O. Beckwith’s P-51D Mustang 15 Squirt.

USAAF/National Archives via Fold3

The kit was contained within a zipper type kapok bag as shown in the photo below and consisted of a A-3 life raft, a Gibson Girl radio, a Naval kit of visual signal equipment, and rations.

Major James B. Tapp inspecting the results of a test of the life raft rescue kit (USAAF/National Archives via Fold3)

When the tank was released, it would separate and a static line would open a parachute that allowed the kit to descend slowly to the pilot in water. The life raft rescue kit was first tested by Major Tapp on December 11, 1944 as shown in the photo below.

Major James B. Tapp tests the life raft rescue kit while on Oahu prior to deploying to Iwo Jima (David Beyl via John W. Lambert)

On December 12, 1944, Major Tapp tested the kit again, this time with 2nd Lt. Charles C. Heil, the 78th Fighter Squadron’s resident swimming champion, in the water off Oahu. The concept and equipment worked so well that the Hickman Air Depot began assembling these kits.

During actual operations on Iwo Jima, the P-51D Mustangs carrying the life raft rescue kits were code named “Josephines”. In the picture below, three 462nd Fighter Squadron Mustangs are flying combat air patrol around Iwo Jima. The P-51D Mustang in the foreground of the photo, 628, is carrying a life raft rescue kits under its left wing and is being flown by Lt. Edward Linfante. The middle Mustang is 602 Metalball and is being flown by Lt. Edward Bahlhorn. The Mustang in the background is believed to be 603 Little Joe and most likely being flown by Lt. Jesse Sabin.

Three 462nd Fighter Squadron Mustangs flying Combat Air Patrol around Iwo Jima (506th Fighter Group Association via Ed Linfante)

References:

1. The Long Campaign: The History of the 15th Fighter Group in World War II, John W. Lambert, Schaffer Publishing Ltd. (2006).

Photo(s) of the Week; 462nd Fighter Squadron Dispersal Area

506th Fighter Group ground crewmen push a North American P-51D-20-NA Mustang (Serial No. 44-72560) across Marsden matting in the 462nd Fighter Squadron dispersal area on North Field. While it is not known who was assigned to fly this Mustang, members of the 506th Fighter Group Association believe the plane was named Little Joe.

USAAF/Loomis Dean/National Archives via Fold3

Several things to note about this picture for modelers. First is the wear on the backside of the propeller blades from the sand and volcanic grit on Iwo Jima. The cuff at the bottom of the blade was made of a hardened rubber so it does not show the wear that the metal portion of the blade does. Second is the light color and the pattern of the exhaust staining down the side of the fuselage. Third is the wooden twin Uncle Dog antennae, and their location and spacing on the spine. Fourth is the AN/APS-13 rear warning radar installed on the tail.

The official caption to this photo is 7th Fighter Command personnel push a North American P-51 “Mustang” toward the dispersal area at an airfield on Iwo Jima. July 1945.

Kit News: Eduard Includes Decals for 542 “Fighting Lady” in its 1/72nd North American P-51D Mustang ProfiPACK Boxing

Eduard recently released the 2nd ProfiPACK boxing of its popular 1/72nd North American P-51D Mustang kit. Most of decal options are of fighter aces; Lt. Col. John D. Landers’ Big Beautiful Doll, Lt. Col. John C. Meyer’s Petie 3rd, Maj. Leonard K. Carson’s Nooky Booky III, Lt. Col. Glenn T. Eagleston’s P-51D-20-NA, and Capt. Fredie F. Ohr’s “Marie”.

Eduard

But it also includes decals for 542 Fighting Lady, a P-51D-20-NA assigned to the 457th Fighter Squadron, 506th Fighter Group. Neither of the pilots assigned to fly Fighting Lady were aces.

Eduard

542 Fighting Lady was assigned to 1st Lt. Ralph Gardner and 2nd Lt. Chester Jatzcak. Below is a nice close up picture of the pin up art that adorned the fuselage.

542 Fighting Lady (506th Fighter Group Association/Dr. John Benbow)

While the quality of the below photo is not the best, it does clearly shows the position of the name Fighting Lady on the nose below the engine exhaust stacks and the elegant design of the Mustang’s nose.

Unknown ground crew member lying on the wing of Fighting Lady (506th Fighter Group Association/Dr. John Benbow)

Norma Jatczak, 2nd Lt. Chester Jatczak’s wife, was of the belief that the plane’s name was “Broadway Gal”. Unfortunately, the 506th Fighter Group Association does not have a photo to substantiate her belief. Eduard suggests in its instructions that the name of the plane was changed from Fighting Lady to “Broadway Gal” at a later date.

2nd Lt. Chester Jatczak crouched on the wing of “Fighting Lady” (506th Fighter Group Association via Norma Jatczak)

Please note the photo below does not have the name Fighting Lady on the nose yet. This photo was most likely taken in June of 1945 as the plane has a solid green tail instead of the initial squadron markings of diagonal green stripes on the tail.

1st Lt. Ralph Gardner in the cockpit of Fighting Lady (506th Fighter Group Association/Dr. John Benbow)

I interviewed Ralph Gardner at the 2013 506th Fighter Group Reunion in Chino, California, but did not think to inquire about whether the plane had the name of “Broadway Gal” at one point in time, or whether the name was on the right side of the nose. The photo below appears to dispel the notion that “Broadway Gal” appeared on the right side of the nose.

1st Lt. Ralph Gardner flying Fighting Lady (506th Fighter Group Association/Dr. John Benbow)
457th Fighter Pilots in front of Fighting Lady – Front row left to right; Lts. Alan Kinvig and George Hetland; Back row left to right; Lts. Ray Miller, Martin Ganschow, Ralph Gardner and Larry Grennan (506th Fighter Group Association via Ralph Gardner)

1st Lt. Gardner was credited with an aerial victory on June 10, 1945.

Thanks to Eduard for including decals for an Iwo Jima VLR Mustang in this boxing!

Photo(s) of the Week; Engine Removal

This photo is the companion photo to the last Photo(s) of the Week I posted recently; just taken from the right side of the plane. Ground crew have just hoisted the Packard built Rolls Royce Merlin engine after disconnecting it from the engine mounting framework and other connections. Very cool photo!

USAAF/National Archives via Fold3

This is 172, a 47th Fighter Squadron, 15th Fighter Group, P-51D Mustang. 7th Fighter Command ground crew worked under very challenging conditions. Just keeping the engine and machine guns clear of sand and the volcanic grit was a constant battle.

The official USAAF caption to this photo reads: Mechanics removing engine from a North American P-51 “Mustang”. Iwo Jima, Bonin Islands.

Kit Review: Eduard’s 1/72nd North American P-51D Mustang Royal Class Dual Combo

I received Eduard’s 1/72nd North American P-51D Mustang Royal Class Dual Combo boxing recently. In scaling down their 1/48th scale P-51D kit to 1/72nd scale, Eduard made it so can you build any variant from a D-5 through a D-25,including the K, without having to buy any extra sprues or after market accessories. For instance, you can build an Iwo Jima VLR Mustang from any boxing they release because all of the necessary parts are present in the kit. Wise decision on Eduard’s part. On to the sprues.

Eduard

The first sprue (A) is the clear parts and they are crystal clear and provide all three of the variations of rear portion of the canopy. The clear parts are bagged separately to protect against scratches.

Eduard

The second sprue (B/C) contains the fuselage halves, wings, and horizontal and vertical stabilizers. All three tails are present, the D-5 without the fillet, the D-5 with the sway-back fillet, and tails with the regular fillet that were on most D-10s and all D-15s, D-20s, D-25s and Ks. Both the flaps and ailerons are molded separately which gives the modeler the ability to position them as he or she desires.

Eduard

The rivet detail is exquisite as shown in the picture below. Yet, Eduard also showed restraint and did not put them on the wings where they would have been puttied over to increase the laminar flow over the wings. Nice touch on Eduard’s part.

Eduard

The third sprue (E) contains a variety of different parts, including the cockpit parts, wheel wells and landing gear parts, spinner and propeller parts, and other external parts. Both types of pilot seats are provided; Warren-McArthur seat ( part E14 ), and Schick- Johnson seat (part E33 ).

The SCR-522 radio set and SCR-695 set which are mounted above the fuselage fuel tank behind the pilot’s seat are molded as one piece along with the mounting framework ( part E3)

Included also are the twin Uncle Dog antennae (parts E56 & E57).

Because Eduard designed the kit so you can build any variant of the D model from Block 5 through Block 25, Eduard has included three different versions of the right side cockpit panel. Nice touch on Eduard’s part.

The fourth sprue (F) contains all of the underwing ordinance and drop tanks carried by Mustangs, the Hamilton uncuffed propeller blades, the Aero Products propeller blades, and some minor cockpit parts. Included are the 110 and 165 gallon drop tanks (with sway braces), and HVAR rockets carried by Iwo Jima VLR Mustangs.

As we come to expect from Eduard, this Royal Class Dual Combo boxing comes with a lot extra goodies. In addition to two pre-painted photo etch cockpit frets and canopy masks, there are two 3D printed Warren-McArthur seats, two 3D printed sets of exhaust stacks (one shrouded and one unshrouded), two sets of cast resin main tires, and two cast resin tail wheels.

Eduard

In addition, Eduard has included a set of OMask foam wheel well plugs that make it incredibly easy to paint the wing area around wheel wells without any tape. They also included OMask foam wheel well plugs in their 1/48 North American P-51B Mustang Royal Class Dual Combo boxing and their 1/48 Curtiss P-40E Warhawk Royal Class Dual Combo boxing. Really nice touch on Eduard’s part! Let’s hope this trend continues.

There decals for 14 different planes in this boxing. Included are decals for two Iwo Jima VLR Mustangs.

Iwo Jima VLR Mustang Decals: The first set of markings is for 528 “The Enchantress” (P-51D-25-NA, 44-72671), a 457th FS Mustang flown by 2nd Lt. William E. Saks. 2nd Lt. Saks was one of the pilots lost on the June 1, 1945 “Black Friday” mission, but he was not flying 528 on that day. “The Enchantress” is popular amongst modelers because the nose art and pin-up girl that adorns the fuselage.

Eduard

The second set of VLR markings is for 555 “The Ole Lady/Little Anne/My Darlin Betty Ann” (P-51D-25-NA, 44-72628), a 458th FS Mustang flown by 2nd Lts. James E. Coleman and Ralph R. Coltman, Jr. I like the markings that appear on the right side of the fuselage, and decals are provided for the blue diagonal stripes on the tail.

Eduard

The main decals come in one really large decal sheet along with two smaller decal sheets that contain complete sets of stencils.

Eduard
Eduard
Eduard

This looks like an extremely nice 1/72nd North American P-51D Mustang kit. From what I have seen of already built models, they certainly look every bit the part of the real thing. If you are wanting to build a Iwo Jima VLR Mustang in 1/72nd scale, this is your kit.

Eduard also announced that they will do a limited edition Iwo Jima VLR Mustang boxing in the 2nd quarter of this year. If you want additional decal options, the limited edition boxing will be worth waiting for.

Kudos to Eduard!